Push the drum unit into the printer until it clicks into place.ģ. Fold down the toner cartridge handle once the toner cartridge is in place. Make sure that you match the toner cartridge color to the same color label on the drum. Hold the handle of the toner cartridge and slide the toner cartridge into the drum unit. Shake the toner cartridge side to side before reinstalling. Repeat steps 2d - 2f to clean each of the remaining three corona wires. If you do not, printed pages may have a vertical stripe. Clean the corona wire inside the drum unit by gently sliding the green tab from left to right several times.īe sure to return the tab to the home position. Open the gray plastic corona wire cover by lifting the tabs or latches, located on the right and left sides of the cover.Į. Push the release the latches of the corona wire cover (1), and then open the cover. Hold the handle of the toner cartridge and slightly push it toward the machine to unlock it. If you cannot pull the drum unit out, make sure that the front cover is fully open.Ĭ. Press down on the front cover release button and open the front cover by pulling it towards you.ī. Go to step 2 to clean the corona wire for the color line you see.Ī.

Review your printed pages to identify the color causing the problem. I think the printer is 'toast' and it's not that old.1. If I asked for 6 copies (with the photocopy ability) it did 6 reduced size copies on one page. If I asked for 2 copies it made two reduced copies on one page. The 2nd page would be what I wanted, but maybe a minute later. I replaced the printer cartridge and at first the printer wanted to do the alignment test every time I wanted to print. I think the printer is 'toast' and it's not that old. Now my printer is only trying to print a test alignment sheet and seems to have run out of ink even though this is a new ink cartridge.

Black ink print test